D&D: It’s A Trap! – DM’s Challenge
There’s no better way to pass your time shut in, than by challenging yourself to build the deadliest trap that’s sure to kill those meddling do-gooders.
While we’re all shut-in (or at least as shut-in as we can be, and if you’re not, I hope you’re keeping safe) there’s no better way to pass the time than by building the deadliest death traps imaginable, so that you can be sure to deal with those meddlesome fools once and for all. Today we’re offering up this community challenge: design a deadly trap that’s sure to kill those low-level adventurers who are always snooping around your lair.
Use the ingredients listed below, then we’ll check back next week with some of our favorites. First though, here’s a look at trap design to get some of you started, or scroll to the end for your list of ingredients.
Traps. The unsung hero, or villain, depending, of many an adventure. Whether a humble pit trap, or a hallway full of implausibly functional scything blades that were built a hundred years ago by a society that prided its temple decor for both ostentatiousness and lethality; the humble trap holds a place in the annals of D&D. And little wonder. They bridge the gap between exploration and combat. They provide a puzzle to think through, and a reward for paying attention to your surroundings–or a consequence for not.
But too often, dealing with a trap come down to making a perception (or investigation, depending) check or possibly a Dex save, and that’s it. Trap done. They’re often relegated to a binary state of either readiness or having fired, never cycling back and forth, or changing. Xanathar’s Guide aims to change that. They dig a little deeper into traps, showing us what lies behind those DCs. So let’s check them out.
For starters, there’s two ways of thinking about traps, simple vs. complex. Simple traps are the ones described above, the binary, dumb-fire rockets. Simple does not mean harmless, many of these can be deadly. But for today’s article, we’re going to be looking at Complex Traps and what makes them tick.
Complex traps are a little more dynamic. These have multiple moving parts, some of which feed into the others to make the trap more insidious. If you’ve ever played a dungeon building or tower defense game, these are the ones where multiple elements work together to make something deadly.
Xanathar’s Guide breaks complex traps down into a few component parts.
- Level/Threat – How dangerous is the trap, how lethal is it: moderate, dangerous, or deadly?
- Trigger – What sets the trap off?
- Initiative – When does the trap take actions during combat?
- Active Elements – Specific actions/effects the trap creates on its turn. Basically, what are we seeing in this trap? Blades, jets of flame, that sort of thing.
- Dynamic Elements – These are elements of a trap that change up as the trap fights on. This sorry of evolves out of the motion.
- Constant elements – Threats/effects that are constantly active. Poison gas that makes everyone save indiscriminately, or poisonous darts that shoot out from hidden alcoves–this is a great tool to have
- Countermeasures – How do you stop this crazy thing
Of course the real trick is in putting all of these elements together.
A complex trap functions in play much like a legendary monster. When it is activated the traps’ active elements act according to its initiative. After resolving the effects of the trap’s active elements, check its dynamic elements to see if anything changes about the trap.
And change they do. Let’s take a look at a sample trap, then talk a little more about design. So for starters we have the Path of Blades, a complex trap that is a long hallway 20 get wide and 160 get long. Getting down the hallway can be tricky though. Let’s go through component by component.
Trigger – the trap is set off as soon as someone steps into the hallway and remains active as long as there are any non-undead in the hall.
Initiative – The trap takes actions on initiative 20 and 10.
Active Elements – these are a set of whirling blades, crushing pillars, and a rune of fear. Depending on where they are in the hallway, characters are affected by one of the three effects.
Dynamic elements – The whirling blades and the rune intensify as the encounter wears on. The blades’ damage increases every time they miss an attack, and the rune’s dc goes up each time someone messes with it.
Constant effects – the blades and rune of fear also affect each creature in your respective areas when it ends it’s turn inside them.
Countermeasures – The blades have a few different ways of dealing with them. An investigation check, readying an attack as one of the blades snakes past, or Thieves’ tool proficiency. Worth noting though, the countermeasures don’t defeat the whole trap in one go. They reduce its effectiveness, but still are numerous enough to challenge players.
So with this Path of Blades as an example, let’s talk more about design. As you can see, the key to making this trap tick is how often it activates. It goes twice in a round, plus it has two effects that either attack again or cause an extra saving throw if the players haven’t moved out of the affected areas.
For all it’s seeming complexity, it boils down to 2 things. They have attacking elements that continually attack, and they have something about the trap that changes. Blades do more damage, or the saving throw gets harder for the fear. All it takes is keeping in mind something as simple as how does this trap change. Build a good dynamic effect, and it adds a little more depth to the way the trap unfolds. It gives it a sense of narrative–or at least the phases of a boss fight.
Alright. So for this challenge, we want to see your best Elemental-themed traps. All traps must have at least one elemental component. Tell us your best traps, how they’re set off, what kind of damage they do and if there are any of the below components:
- Level/Threat – How dangerous is the trap, how lethal is it: moderate, dangerous, or deadly?
- Trigger – What sets the trap off?
- Initiative – When does the trap take actions during combat?
- Active Elements – Specific actions/effects the trap creates on its turn. Basically, what are we seeing in this trap? Blades, jets of flame, that sort of thing.
- Dynamic Elements – These are elements of a trap that change up as the trap fights on. This sorry of evolves out of the motion.
- Constant elements – Threats/effects that are constantly active. Poison gas that makes everyone save indiscriminately, or poisonous darts that shoot out from hidden alcoves–this is a great tool to have
- Countermeasures – How do you stop this crazy thing
Make sure it does elemental damage of some type–and then either leave a comment or send an email to jr@bolsinteractive with the subject “Traps” and we’ll check back next week!
Best of luck!
